The CZBA mini dust collectors are suitable for numerous applications and types of industrial dust. They extract dry suspended dust directly at the point of origin and thus create the prerequisite for a clean production environment. The mini dust collectors are used to suck clean individual workstations and dust-creating machines of all kinds. The collectors are fitted with filter cartridges or filter pockets, which can be cleaned manually or automatically (Pulse Jet) during operation. The mini dust collectors can also be used in the case of hazardous substances in combination with an H13 secondary filter. The filter housing has a high-grade powder coating both inside and outside.

 

Dedusting:

Upon entering the filter housing, the raw gas flows against a deflector, thus achieving a separation of coarse particles already before it reaches the filter cartridge (sifter effect). In this way the filter cartridge is also shielded against abrasive particles. The coarse dust thus falls straight into the drawer. The raw gas subsequently flows through the filter cartridge, thereby achieving clean gas values of less than 2 mg/m³. Applying an electronically controlled filter cleaning process, the dust is cleaned from the outside of the filter cartridge by means of air blasts during operation. The cleaning system is equipped with a venturi nozzle and displacer. The venturi nozzle causes an intensification of the air blasts, while the displacer in turn reduces the dead volume inside the filter cartridge. The result is a high degree of cleaning with minimum compressed air consumption. The cleaning may take place by time or, optionally, by the pressure difference via the filter cartridge.

 

Benefits:

• low noise level
• the device requires little space
• low price